PHD ULTRA Syringe Pumps


PHD ULTRA™는 가장 까다로운 유체 응용 분야를 위한 솔루션입니다. 이 펌프는 실린지 펌프의 최신 기술을 대표하며 세계 최대 규모의 실린지 펌프 사용자의 피드백을 활용하여 개발되었습니다.

PHD ULTRA™ 실린지 펌프 시리즈는 질량 분광법, 교정, 약물 및 영양 주입, 미세투석, 분배, 크로마토그래피 및 LC/HPLC를 포함한 다양한 기술 용도를 위해 설계된 고정밀 마이크로리터 및 밀리리터 호환 펌프 제품군입니다. 



  • New patent pending drive mechanism for unmatched smooth flow, accuracy and precision
  • From picoliter to 216 ml/min flow rates
  • Advanced programming for true multi methods without a PC
  • Quick start methods
  • Alpha/numeric keyboard without a PC
  • Real and relative time clocks
  • Icon operation
  • New color LCD touch screen
  • Up-front control knobs for ease of operation
  • Vertical or horizontal orientation
  • Adjustable linear force to 75 lbs across the entire flow range
  • Daisy chain
  • Remote configuration available
  • CE, ETL(UL, CSA), WEEE, EU RoHS + CB Scheme
  • 2-year warranty


  • Nanofluidics
  • Drug/Nutritional infusions
  • Electro-spinning
  • Reaction chamber addition
  • Mass Spec calibration
  • Feeding cells
  • Low pressure chromatography
  • Continuous flow
  • Flow programming
  • Gradients
  • % composition step changes
  • Large flow deliveries
  • I/O interactive experiments


Description of Typical Applications

  • Animal Infusions or Withdrawals—the PHD ULTRA™ will control the delivery of varying % of nutrients or drugs infused into animals, flush lines using catheters, needles, cannulae or microdialysis.
  • Proportioning and Delivering of Mixtures—mixing gradients or proportions with independent control of two liquids.
  • Aerosol for Coating—the pump at high pressure can create an aerosol for the delivery of coating materials such as pharmaceutical tablets and aerosol studies.
  • Delivery to Mass Spectroscopy—the delivery of fluids to the MS for calibration, matrix addition or ESI sample.
  • Compensating Flows—the continuous infusion and simultaneous withdrawal of liquids for cell cultures or perfusion chambers.
  • Dispensers/Injectors—Adhesives, Cell injection, MRI Dyes, Activators/Enzymes, Flow injection, Microreaction vessels, or Stereotaxic delivery.
Specifications 70-3005
Accuracy ±0.25%
Classification Class I
L x D x H
12.0 x 8.5 x 7.25 in
(30.48 x 21.59 x 18.42 cm)
Display 4.3″ WQVGA TFT Color Display with Touchpad
Drive Motor 0.9° Stepper Motor
Environmental Humidity 20% to 80% RH, non condensing
Environmental Operating Temperature 40°F to 104°F (4°C to 40°C)
Environmental Storage Temperature 14°F to 158°F(-10°C to 70°C)
Flow Rate Maximum 216 ml/min using 140 ml syringe
Flow Rate Minimum 1.5 pl/min using 0.5 µl syringe
I/O & TTL Connectors 15 pin D-Sub Connector
Input Power 50 W, 0.5 A fuse
Installation Category II
Max Linear Force 75 lb @ 100% Force Selection
Mode of Operation Continuous
Motor Drive Control Microprocessor with 1/16 microstepping
Net Weight 10 lb (4.5 kg)
No of Syringes 2
Non Volatile Memory Storage of all settings
Number of Microsteps per one rev of Lead Screw 12,800
Pollution Degree 1
Pump Configuration Standard
Pump Function Infusion Only
Pusher Travel Rate Maximum 190.8 mm/min
Pusher Travel Rate Minimum 0.18 µm/min
Regulatory Certifications CE, UL, CSA, CB Scheme, EU RoHS
Step Rate Maximum 26 µsec/µstep
Step Rate Minimum 27.5 sec/µstep
Syringe Rack Type Standard Rack
Syringe Size Maximum 140 ml
Syringe Size Minimum 0.5 µl
USB Connectors Type B
Voltage Range 100-240 VAC, 50/60 Hz
RS-232Connectors 9-pin D-Sub Connector