Incapacitance Meter

정적 하중 측정기(Incapacitance Meter)

정적 하중 측정기(Incapacitance Meter)는 설치류의 뒷발에 가해지는 정적 하중을 측정하여 통증을 정량화하도록 특별히 설계된 장비입니다. 왼쪽 발과 오른쪽 발에 가해지는 하중을 비교하여 객관적인 통증 지표를 제공하므로 소형 동물의 자발적 통증 평가에 이상적입니다. 실험 동물(생쥐 또는 쥐)을 맞춤형 고정 장치에 고정하여 각 뒷발이 정밀한 힘 측정판 위에 놓이도록 합니다. 동물이 자세를 바꾸면 정적 하중 측정기가 각 뒷다리에 가해지는 힘을 지속적으로 기록하고, 대칭 지수와 시간 경과에 따른 평균 하중을 계산합니다. 이 비침습적이고 자동화된 측정 방식은 동물에 가해지는 스트레스를 최소화하고 통증 및 행동 연구에서 재현성 있는 데이터를 얻을 수 있도록 합니다.

정적 하중 측정기(Incapacitance Meter)는 뒷발 아래에 장착된 듀얼 채널 무게 센서를 사용하여 무게 분포를 매우 정확하게 측정합니다. 실시간 LCD 터치스크린 디스플레이는 좌우 발 무게와 대칭 지수를 표시하며, 내장 컴퓨터는 데이터를 즉시 분석합니다. 테스트는 사용자가 정의한 시간(몇 초에서 몇 분까지) 동안 진행되며, 이 시간 동안 정적 하중 측정기(Incapacitance Meter)는 각 발에 가해지는 힘을 평균화합니다. 정적 하중 측정기(Incapacitance Meter)는 특히 통증 및 염증 연구에 적합하며, 영향을 받은 사지의 체중 부하 감소를 측정하여 자발적인 통증을 민감하게 평가합니다.

반사 기반 테스트와 달리, 이 장비는 동물이 자유롭게 서 있는 상태에서 휴식을 취할 수 있도록 하여 관찰자에 관계없이 진행 중인 통증이나 회복을 측정할 수 있습니다. 시작, 정지, 재설정, 보정 등 모든 작동은 터치스크린 제어 장치에서 제어되므로 추가 장비 없이 유연하고 프로그래밍 가능한 테스트가 가능합니다.

Benefits and Advantages

정적 하중 측정기(Incapacitance Meter)는 객관적이고 관찰자에 독립적인 데이터를 제공하여 주관적인 편견을 제거합니다. 동물이 자연스럽게 서 있는 동안 각 뒷발을 지속적으로 측정함으로써 인위적인 자극 없이 자발적인 통증을 정량화합니다. 주요 장점은 다음과 같습니다.

Benefits Advantages
Stress-free testing Animals are unrestrained and free to adopt a normal stance, avoiding stress-induced fluctuations.
High sensitivity Dual-platform design ensures even small shifts in weight are detected, enabling early pain detection. Published data show such devices reliably track decreased limb loading in rodents after inflammatory or neuropathic injury.
Repeatable results Once animals are trained to stand in the incapacitance meter, repeated trials show very little variation in baseline weight distribution. This high repeatability means subtle changes (e.g. due to drug treatment) can be detected confidently.
Automated analysis Integrated software computes symmetry indexes and statistical outputs in real time, saving time for researchers. Users can quickly export charts or raw data for publication-quality reports from our incapacitance meter.

Specification

♦Basic specification

Application Mouse and Rat
Commands 7-inch capacitive LCD touchscreen, Resolution: 1024 × 600 dpi
Power 100-240 VAC, 50-60Hz
Operating Environment 10°C to 40°C; 5% to 95% RH (non-condensing)

♦Operation

Animal weight (per paw) 0-500g
Resolution 0.01 g
Accuracy 0.1g
Measure time 1–100 s
Measure starting mode Manual and Automatic
Calibration With weight calibration
Data Collections per Test 1–20 times
Internal Space Range 0–100 mm adjustable
Space Adjustment Track Linear guide rail
Angle Adjustment Range 55–75 degrees
Data Data exportable via USB

 

♦Data Result

  • Left limb pressure
  • MAX Right limb pressure MAX
  • Left limb pressure AVE
  • Right limb pressure AVE
  • Left limb pressure standard deviation
  • Right limb pressure standard deviation
  • Difference between limbs
  • Symmetry Index

♦Physical Info

Restrainer Material 10 mm transparent acrylic
Weight transducer assembly size 170x95x50mm
Restrainer size (Mouse) 80x62x76mm
Restrainer size (Rat) 130x77x156mm
Control unit size 320x270x120mm
Weight 7.8kg
  • Mice와 Rat 모두에게 적합합니다.
  • 기록 데이터: 뒷발 대칭 지수.
  • Mice와 Rat 모두에서 뒷발의 무게 분포를 측정하는 데 적합하며, 자발적인 통증을 평가하는 데 이상적입니다.
  • 구속되지 않은 동물은 스트레스로 인한 자세 변화를 피하고 정상적인 자세를 자유롭게 취할 수 있습니다.
  • 좌우 뒷발의 힘을 독립적으로 측정할 수 있는 독창적인 듀얼 센서 설계로 최대 0.3g의 정확도를 제공합니다.
  • 쉽고 편리한 교정으로 정확성을 보장합니다.
  • LCD 터치스크린은 좌우 발의 무게 분포를 실시간으로 역동적으로 표시합니다.
  • 양쪽 발의 최대, 최소 및 평균 힘을 자동으로 계산합니다.
  • 대용량 데이터(2,000개)입니다.
  • 데이터는 USB 포트를 통해 내보낼 수 있습니다.
  • 높은 정밀도의 계량으로 반복적이고 일관된 테스트가 가능합니다.